







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Winchester, NV
Vanities, tile, and fixtures are the three surfaces a bathroom is judged by. A vanity sets the storage and the sink line, tile covers the floor and shower walls where water does the most damage, and fixtures (faucets, shower valves, drains, and trim) decide whether the room works every morning or leaks into the drywall. If you’re replacing one of the three, you’re usually touching the other two, and that’s the work Bradford Remodeling Co Winchester handles for homeowners across the southeast valley. Call (844) 972-4839 and a live person picks up, day or night.
We do this as part of full Bathroom Remodeling, so the vanity doesn’t get set before the tile substrate is right and the shower valve doesn’t get buried behind a wall that hasn’t been pressure-tested. Everything is quoted in writing before a tool comes out, and every finished job carries our 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge.
Key Takeaways
- Vanity, tile, and fixture work in Winchester typically runs $2,400 – $9,800 depending on scope and material tier.
- We quote in writing before work starts, using documented brands like KraftMaid, Wellborn, Kohler, and Moen.
- Our technicians have up to 22 years of experience, and every crew member is background-checked and uniformed.
- Wet-area tile in Winchester needs the right substrate and waterproofing, or you’ll be redoing it in two years.

When You Need Vanities, Tile & Fixtures
Bathroom work rarely announces itself. It shows up as a soft spot under the vanity, a grout line that won’t stay clean, or a faucet that drips louder every month. Here are the situations Winchester homeowners call us about most:
- Your vanity is rotting from the bottom up. In older Winchester homes with cast-iron or copper supply lines, small slow leaks under the cabinet go unnoticed until the particleboard swells. If the cabinet floor is soft or the toe kick is separating, the leak has been there a while.
- The tile is dated, cracked, or popping loose. Tiles that sound hollow when you tap them have lost their bond to the substrate. In the Vegas valley’s dry heat and hard water, that failure shows up faster than most people expect, especially on floors near a shower.
- The shower valve only works at one temperature. A valve that won’t balance hot and cold usually means the cartridge or the pressure-balancing spool is worn. That’s a fixture replacement, and it’s worth doing before it fails completely and scalds someone.
- Grout lines are permanently dark. Stained grout in a shower that won’t come clean after repeated scrubbing usually means moisture is getting behind the tile. The fix isn’t a new grout color; it’s addressing the waterproofing layer underneath.
- You’re updating to sell or to age in place. A taller comfort-height toilet, a curbless shower, or a vanity with knee clearance makes a real difference for a homeowner planning to stay put. We plan fixture heights and clearances around the person using the room.
- A prior remodel left mismatched finishes. Chrome faucet, brushed nickel trim, oil-rubbed bronze shower head. Replacing the fixtures as a set is often cheaper than chasing them piece by piece.
Our Vanities, Tile & Fixtures Process
Here’s the sequence we run, in order, on every vanity, tile, and fixture job in Winchester. Nothing skips a step because it looks like it can.
- On-site measure and scope. We take the room’s actual dimensions, check the shutoffs, look at what’s behind the existing vanity, and note the condition of the substrate under the floor tile. You get a written scope and a written price before anything else happens.
- Material and fixture selection. We walk you through documented brand lines so the specs are traceable. KraftMaid and Wellborn for cabinetry, Kohler and Moen for fixtures, Cambria or Caesarstone if you’re doing a stone vanity top. You’ll know the exact model numbers going into the order.
- Demo and prep. We protect the rest of the house, haul out the old vanity and tile, and inspect what’s underneath. This is where we find the slow leaks and the failed substrate, and where we tell you rather than discover it mid-install.
- Rough-in and waterproofing. New supply lines, drain, and valve get set and tested. In a shower, the waterproofing membrane goes on before any tile, and it gets inspected before it gets covered.
- Tile and vanity install. Floor tile, shower walls, and the vanity go in with the correct thinset and the correct substrate for each surface. Fixtures go on last, once everything’s cured and the valve’s been tested.
- Walkthrough and guarantee. We clean the site, walk you through every finish, and hand you the signed 365-Day Done Right Promise in writing. If anything fails inside the year, we come back and correct it at no charge.

Vanities, Tile & Fixtures Pricing in Winchester
These are real ranges, not a “call for a quote” placeholder. Your actual price depends on square footage, material tier, and how much of the room is being touched.
| Line item | Typical range |
|---|---|
| Vanity replacement (stock cabinet, single sink) | $700 – $1,900 |
| Vanity replacement (semi-custom, double sink) | $1,800 – $4,500 |
| Vanity top (quartz or stone) | $350 – $1,200 |
| Floor tile, per square foot installed | $9 – $22 |
| Shower wall tile and waterproofing | $2,200 – $6,500 |
| Faucet and shower fixture replacement | $240 – $900 |
| Full vanity + tile + fixture package | $2,400 – $9,800 |
What moves the number: the material tier you choose (a stock vanity versus a semi-custom Wellborn with a Cambria top is a real spread), the square footage of tile, whether the shower substrate needs rework, and whether the plumbing has to be moved. Moving a drain or supply line inside a slab-on-grade home is a bigger job than relocating a vanity on a framed floor.
We give you a written price before any work starts and it doesn’t shift at the door. If we open a wall and find something genuinely different underneath, we stop, show you, and put the change in writing before we proceed. Call (844) 972-4839 for a free estimate.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity replacement cost in Winchester?
A stock single-sink vanity replacement in Winchester runs $700 – $1,900 installed, and a semi-custom double vanity with a quartz or stone top runs $1,800 – $4,500. The spread comes from cabinet line, top material, and whether the plumbing has to move. Call (844) 972-4839 for an exact quote – estimates are free.
Can you replace tile and fixtures without gutting the whole bathroom?
Yes. Vanity, tile, and fixture work is often done without a full gut, as long as the substrate underneath is sound. We inspect before we commit, because tile laid over a failing substrate will come loose again in a couple of years. If the substrate is compromised, we’ll tell you and quote the fix in writing before any work starts.
How long does a vanity, tile, and fixture job take in Winchester?
A vanity replacement alone is usually a one- to two-day job. A full package with floor tile, shower walls, and fixture replacement typically runs five to ten working days, depending on square footage and how much waterproofing is needed. We give you a written schedule at the same time as the written price.
Do you work with specific brands, or can I supply my own?
We install from a documented brand roster – KraftMaid and Wellborn for cabinetry, Cambria and Caesarstone for stone surfaces, Kohler and Moen for fixtures. Those brands carry manufacturer specs and warranties that back our own guarantee, which is why we work with them. If you’re supplying your own materials, we’ll review the specs with you before install so the fit and finish are right.
Why Bradford Remodeling Co Winchester
Bradford Remodeling is part of the Garrison Partners family, established in 2004, and operates as an independently owned and operated business held to The Garrison Standard. That standard is what backs every commitment on this page: a written price before work starts, background-checked and uniformed technicians on every job, live-person phone coverage around the clock (no voicemail, no callback queue), and the 365-Day Done Right Promise on every completed project. If the work fails inside the guarantee window, we return and correct it at no charge.
Our technicians have up to 22 years of experience, and every crew works from the same written scope so nothing gets decided on the fly at the job site. When we close a job, it closes squared away: clean site, documented scope, signed written guarantee in your hand.
If you’re planning a larger renovation that includes the vanity, tile, and fixtures, see what full Bathroom Remodeling in Winchester covers, or start at our home page to browse related services. Homeowners in nearby communities can also find kitchen remodeling in Winchester, whole-home remodeling in Winchester, general contracting in Winchester, bathroom remodeling in Henderson, bathroom remodeling in North Las Vegas, bathroom remodeling in Paradise, bathroom remodeling in Spring Valley, bathroom remodeling in Enterprise, bathroom remodeling in Summerlin, bathroom remodeling in Green Valley, and our remodeling guides.
Get Your Vanity, Tile & Fixtures Quote
Call (844) 972-4839 for a free estimate. A live person answers, 24/7, and you’ll get a written price before any work starts – no numbers that move at the door, and a signed 365-Day Done Right Promise when the job closes. Vanities, tile, and fixtures are the three things a Winchester bathroom is judged by, and we treat them that way.
Written by the team at Bradford Remodeling Co Winchester, serving Winchester.


